Create a Transend account now to earn Special Pricing and Promotions. Sign Up Now

Create account for special pricing & promos.

Login / Sign Up

Transtar Manual Transmission NV4500-A

TranstarManual Transmission

Part #: NV4500-A

$1,890.10 $1,500.00 Core

Call for Availability: +1 (833) 363-1938

Login for personalized shopping

Description & Specs

All units are torn down and thoroughly cleaned. All hard parts are inspected and if a known failure point has been identified, the part is replaced with a remanufactured or new part that is OE-quality or better. All soft parts are replaced. Units are assembled and, when possible, Dyno tested (Software to test some late models units is not yet available).

Manual Transmission; Remanufactured; Cast Iron Case, Detachable Bell Housing, External Slave Cylinder, Square Four Bolt Shift Tower, Main Case Cast 16812, Top Cover Cast 18860, Or 25137, Tail Housing Cast 18306

Name	Specs
Package UOM	Each
Quantity Per UOM	1
Weight	150.00
Weight UOM	Pounds

This Kit Contains

Gasket; PTO Cover × 2

# 301305

# 301485

Insert; Mode, Long, 45MM, Reverse Center × 1

# 321700-2A

Gasket; Adaptor to Transfer Case; Round with 6 Holes × 1

# 331304A

Seal; Front × 1

# 334070

Seal × 1

# 334074A

Seal × 1

# 334074C

Seal × 1

# 334076

Seal × 1

# 334076A

# 334206

# 334211-2

Bearing Cup × 1

# 334211-3

Shim Kit; Mainshaft × 1

# 334226

Shim Kit; Mainshaft × 1

# 334226A

Shim Kit; Mainshaft × 1

# 334226B

Needle Bearing; Input × 1

# 334240

Bearing Race; Input × 1

# 334240-3

Pocket Bearing, Input × 1

# 334267

Needle Bearing × 2

# 334271

Needle Bearing × 1

# 334274

Needle Bearing × 1

# 334275

Needle Bearing; Reverse × 1

# 334277

WASHER, NV4500, REV × 1

# 334290

Back Up Light Switch; Reverse × 0

# 334411

Bearing Cap × 1

# 334483

Top Cover Pin × 2

# 334485A

Gear; 2nd, 37 Teeth × 1

# 334582

3rd Gear Counter Shaft, 30 Tooth, 5.61 Ratio × 1

# 334583-1A

3rd Gear Main Shaft, 29 Tooth, 5.61 Ratio × 1

# 334583A

Gear; Countershaft 4th, 38 Teeth × 1

# 334584-1A

Gear; 5th, 51 Teeth, Countershaft, Used with 22 Teeth Mainshaft, 5.61 Ratio × 1

# 334585-1

Gear; 5th, 22 Teeth, with 31 Inner Spline × 1

# 334585-2

Shift Rail; 5th × 1

# 334628

# 334628-1B

Shift Rail × 0

# 334628A

Shift Rail × 0

# 334628D

Hub and Slider Kit; 3rd-4th × 1

# 334642K

Input Shaft; 22 Teeth, 10 Spline × 1

# 334670D

Main Shaft; Main, 19-3/4 × 1

# 334672A

Cluster Shaft; Cluster, 39 Teeth Mainshaft Reverse × 0

# 334674

Cone; Input Synchro × 1

# 334701-1A

1-2 Synchronizer × 2

# 334701-3

Synchronizer; 1st-2nd, Outer × 1

# 334701-5

Synchronizer; 3-4 × 2

# 334703

Synchronizer; 5th × 1

# 334705

Key; For 1-2 × 4

# 334707-1

# 334707-3

Spring; 2-3 Synchro × 6

# 334710-3

Bearing Retainer × 1

# 334724

Detent Plunger × 3

# 334741

Cover; Top, Shell Only, Fits With Push/Twist Round Shifter Only × 0

# 334756

Bolt × 8

# 334792

Nut Kit; Main Shaft, GM and Dodge Gas, Updated, Contains Nut, 2 Set Screws, 2 Brass Plugs and Washer × 1

# 334795BK

Fork; 1-2 Shift × 1

# 334841

Fork; 3-4 Shift × 1

# 334843

Insert; Reverse × 2

# 334846-1

Fork; Reverse, Early With Detent, Push/Twist Top × 0

# 334847

Fork; Reverse, Late With Detent, Square Bolt Type Cover × 0

# 334847A

# 334860A

Plug; Sealing, small, 10.05mm OD × 0

# 359483

Output, Adapter, Input Seal For BW4493 × 1

# 382074

Insert; .770" Long, Straight × 2

# 411850-1

Seal, Reat Output Shaft, 77 x 54 x 12 × 1

# 424074

Bearing; Countershaft, Front, 45 ID X 20 W × 1

# 424260-2

Bearing Race; Countershaft, Front, 73.5 OD x 15.6 W × 1

# 424260-3

Plug; Rear Top Cover × 3

# 476484

Pinion/Input Bearing; 1.625" Bearing Inside Diameter; Rear × 1

# 742G255

Cup Race; Driven Transfer Gear to Case × 1

# D92280

Bearing; Transfer Gear × 1

# D92281

Spring; 1-2 × 4

# AT17285

Vent Tube; 90 Degree × 0

# AT17988

Adaptor; Housing × 0

# AT18305

Shift Rail; 3-4 × 0

# AT18320

# AT18437

# AT18863

Detent Spring; Shift Rail, 1st Design, Orange × 3

# AT18876

Detent Bullet × 2

# AT35660

Top Cover Vent Baffle × 0

# AT4500-63

# AT89279

Needle Bearing × 0

# ATC1110Q

# ATK25/35/30

Race; Input Bearing × 1

# ATNP728109