Transfer Case
Transend - Products List
1.5"x 49 Links, .4346 Pitch, Round Pin Joint
1.5"x 49 Links, .4346 Pitch, Round Pin Joint
Adaptor to Transfer Case; Round with 6 Holes
Adaptor to Transfer Case; Round with 6 Holes
Middle (Center) Synchro, Mode, Carbon Lined
1.5" x 42 Links, .4346 Pitch, Round Pin Joint
1.5" x 42 Links, .4346 Pitch, Round Pin Joint
1.25" x 49 Links, .375 Pitch, Rocker Joint
Transtar AftermarketTransfer Case Unit
Part #: RNP263XHD-Z
Transfer Case Unit
Part #: RNP263XHD-Z
Remanufactured; Electric Shift, 29 Spline Input, 31 Spline Output, 3 Position Dash Switch, Option Code NP1
Remanufactured; Electric Shift, 29 Spline Input, 31 Spline Output, 3 Position Dash Switch, Option Code NP1
NP271, NP273D
31 Spline Output Shaft Type, Casting # 25909 **SERVICE TIP; Add Part # 482860 - Rear Main Shaft Bearing Snap Ring**
31 Spline Output Shaft Type, Casting # 25909 **SERVICE TIP; Add Part # 482860 - Rear Main Shaft Bearing Snap Ring**
Updated, Requires Updated Mode Snap Ring Part # 401865
Updated, Requires Updated Mode Snap Ring Part # 401865
Without Cooler Type
Tag Numbers:
7T4Z-7251-D, 8T4Z-7251-A, 8T4Z-7251-B, 8T4Z-7251-C, AT4Z-7251-A, AT4Z-7251-D, AT4Z-7251-G
Without Cooler Type
Tag Numbers: 7T4Z-7251-D, 8T4Z-7251-A, 8T4Z-7251-B, 8T4Z-7251-C, AT4Z-7251-A, AT4Z-7251-D, AT4Z-7251-G
NP231, NP233, NP241C, NP241D, NP241DHD, NP242, NP243, NP247, NP249; Input, 50mm Inner Diameter, 80mm Outer Diameter, 16mm Thick
NP231, NP233, NP241C, NP241D, NP241DHD, NP242, NP243, NP247, NP249; Input, 50mm Inner Diameter, 80mm Outer Diameter, 16mm Thick
32 Spline Output Shaft Type, Non XHD, Casting # 30605, Include Bearings, Aluminum
32 Spline Output Shaft Type, Non XHD, Casting # 30605, Include Bearings, Aluminum
Drive or Driven, For 1.500" Chain, 40 Teeth
NP136, NP236, NP246, NP263; Washer Type, Pump To Rear Case
NP136, NP236, NP246, NP263; Washer Type, Pump To Rear Case
Input, 6 Pinion, Narrow Teeth
1.50" x 42 Links, .375 Pitch, Rocker Joint, Single-Speed AWD Unit
1.50" x 42 Links, .375 Pitch, Rocker Joint, Single-Speed AWD Unit
Transfer Case
In a four-wheel-drive or all-wheel-drive vehicle, the transfer case plays a critical role in distributing power from the engine to the vehicle's wheels, enabling vehicles to adapt to various driving conditions, ensuring optimal traction, stability, and control. Transtar carries a wide selection of bearing kits, chains, drums, hubs and sliders, motors, pumps, solenoids and transfer case units.