Manual Transmission Parts
Transend - Products List
Categories & Filters
Shop By Category
Axle Bearings, Seals, Studs Bands Bushings Cases, Housings & External Parts Cleaner and Solvents Clutch Plates Complete Transmission Cooler Service Items Coolers & Related Items Driveline Electrical Filters Flexplates Fluids, Additives, Lubes Fuel Service Items General Hardware, Nuts, Bolts, Clips General Lubricants Hard Parts Hardware, Nuts, Bolts, Clips Manual Transmission Parts - Bearing Kits
- Bearings and Races
- Cases & Housings
- Clutch Kits
- Clutch Part
- Flywheels
- Forks and Components
- Gasket Kits
- Gaskets
- Gears
- Master and Slave Cylinders
- M/T Bushings
- Pumps & Stators
- Retainers
- Seals
- Shafts
- Shift Components
- Sliders and Hubs
- Small Component Parts
- Small Parts Kits
- Solenoids
- Switches & Sensors
- Synchronizers
- Throw Out Bearings
- Tools
- Transmission Kit
- Transmission Part
- Washers
Metal Clad Seals Modulators Mounts Personal Protective Products Pistons Rebuilding Kits Sealing Items Service Items Set-Up Bearings Shop Tools and Accessories Small Parts & Seals Snap Rings Sprags & One Way Clutches Springs Tools Torque Converters Transfer Case Parts Valve Bodies and Components Vehicle Detail Products Washers, Bearings & Shims
Brand
Condition
Stock Availability
Kit Contains Bearing Retainer Repair Sleeve And Matching Release Bearing; Release Bearing I.d. 35mm Or 1.385"
TY754, TY755, TY856, TY757, TY758
Login for personalized shopping
This Kit Is For Vehicles That Have Not Had The Original Equipment Bearing Retainer Replaced Or Sleeved. Release Bearing I.d. 33mm Or 1.3". If The Bearing Retainer Has Been Replaced Or Sleeved Use 15-031.; This Kit Is For Vehicles That Have Not Had
TY754, TY755, TY856, TY757, TY758
Login for personalized shopping
Kit contains bearing retainer repair sleeve and matching release bearing.
TY754, TY755, TY856, TY757, TY758, TY756, TY751
Login for personalized shopping
Login for personalized shopping
Login for personalized shopping
This Kit Is For Vehicles That Have Not Had The Original Equipment Bearing Retainer Replaced Or Sleeved. Release Bearing I.d. 33mm Or 1.3". If The Bearing Retainer Has Been Replaced Or Sleeved Use 15-030.
TM702, TM752, TY752, TY754
Login for personalized shopping
Call for Availability: +1 (833) 363-1938
Login for personalized shopping
20mm Thick Input Bearing, 7 Bolt Front Retainer
W55, W58, W56
Login for personalized shopping
Front Bearing, Must Use Seal # 424070 for 2000 and Up Applications with 1-3/8" Input Splines; Must Use Seal # 334070 for 1999-2000 Applications with 1-1/4" Input Splines
NV5600
Login for personalized shopping
Front
M21, M20
Login for personalized shopping
Front
NV4500
Login for personalized shopping
S6-650, S6-650/ML6
Login for personalized shopping
1-3/8 Spline, Includes Retainer and Bearing Set, Must use with LuK Flywheel LFW302 and LuK Clutch L05101 (Organic) or L05117 (Cerametallic)
NV4500, NV4500/MW3
Login for personalized shopping
Cast # 027-908; Iron
T5
Login for personalized shopping
Retainer, Rubber
M5R1, M5R1HD
Login for personalized shopping
Login for personalized shopping