Create a Transend account now to earn Special Pricing and Promotions. Sign Up Now

Create account for special pricing & promos.

Login / Sign Up

Transtar Manual Transmission NV4500-IA

TranstarManual Transmission

Part #: NV4500-IA

$1,449.39 $1,500.00 Core

Call for Availability: +1 (833) 363-1938

Login for personalized shopping

Description & Specs

All units are torn down and thoroughly cleaned. All hard parts are inspected and if a known failure point has been identified, the part is replaced with a remanufactured or new part that is OE-quality or better. All soft parts are replaced. Units are assembled and, when possible, Dyno tested (Software to test some late models units is not yet available).

Manual Transmission; Remanufactured

This Kit Contains

Gasket; PTO Cover × 2

# 301305

Bearing; Needle, 50mm x 58mm x 20mm × 1

# 303211A

Insert; Mode, Long, 45MM, Reverse Center × 1

# 321700-2A

Gasket; Adaptor to Transfer Case; Round with 6 Holes × 1

# 331304A

Seal; Front × 1

# 334070

Seal × 1

# 334074A

Seal × 1

# 334074C

Seal × 1

# 334076

Seal × 1

# 334076A

# 334206

# 334211-2

Bearing Cup × 1

# 334211-3

Needle Bearing; Input × 1

# 334240

Bearing Race; Input × 1

# 334240-3

Pocket Bearing, Input × 1

# 334267

Needle Bearing × 1

# 334271

Needle Bearing × 1

# 334274

Needle Bearing × 1

# 334275

Synchronizer; 5th × 1

# 334275-2

Needle Bearing; Reverse × 1

# 334277

Back Up Light Switch; Reverse × 1

# 334411

Bearing Cap × 1

# 334483

Gear; 2nd, 37 Teeth × 1

# 334582

3rd Gear Main Shaft, 29 Tooth, 5.61 Ratio × 1

# 334583A

Gear; 5th, 51 Teeth, Countershaft, Used with 22 Teeth Mainshaft, 5.61 Ratio × 1

# 334585-1

Gear; 5th, 22 Teeth, with 31 Inner Spline × 1

# 334585-2

Clutch Cone; Reverse Gear, For Mainshaft Reverse × 1

# 334587-2

Shift Rail; 5th × 1

# 334628

Hub and Slider Kit × 1

# 334641K

Slider; 3rd-4th × 0

# 334642

Hub and Slider Kit; 3rd-4th × 1

# 334642K

Slider; 5-Reverse × 1

# 334644

Input Shaft; 22 Teeth, 10 Spline × 1

# 334670D

Main Shaft; Main, 24-9/16, Without Brake Drum Type, 32 Teeth × 1

# 334672P

Cluster Shaft; Cluster, 39 Teeth Mainshaft Reverse × 0

# 334674

Cone; Input Synchro × 1

# 334701-1A

1-2 Synchronizer × 2

# 334701-3

Synchronizer; 3-4 × 2

# 334703

Synchronizer; 5th × 1

# 334705

Key; For 1-2 × 4

# 334707-1

# 334707-3

Spring; 2-3 Synchro × 6

# 334710-3

Bearing Retainer × 1

# 334724

Bearing Retainer × 1

# 334724B

Bolt × 1

# 334792

Fork; 5th Shift × 1

# 334845

Insert; Reverse × 2

# 334846-1

# 334860A

Output Sensor × 1

# 335439A

Insert; .770" Long, Straight × 2

# 411850-1

Bearing; Countershaft, Front, 45 ID X 20 W × 1

# 424260-2

Bearing Race; Countershaft, Front, 73.5 OD x 15.6 W × 1

# 424260-3

Pinion/Input Bearing; 1.625" Bearing Inside Diameter; Rear × 1

# 742G255

Cup Race; Driven Transfer Gear to Case × 1

# D92280

Bearing; Transfer Gear × 1

# D92281

Spring; 1-2 × 4

# AT17285

# ATK25/35/30

Race; Input Bearing × 1

# ATNP728109