Create account for special pricing & promos.
MenuTransend Auto Tech
  1. Home
  2. Transmission
  3. Complete Transmission
  4. Manual Transmissions
  5. NV3550-B
Transtar Manual Transmission NV3550-B
  • Transtar Manual Transmission NV3550-B

TranstarManual Transmission

Part #: NV3550-B
$2,392.23 $1,000.00 Core
Quantity
Login for personalized shopping

Description & Specs

All units are torn down and thoroughly cleaned. All hard parts are inspected and if a known failure point has been identified, the part is replaced with a remanufactured or new part that is OE-quality or better. All soft parts are replaced. Units are assembled and, when possible, Dyno tested (Software to test some late models units is not yet available).

Manual Transmission; Remanufactured

Name Specs
Package UOMEach
Quantity Per UOM1
Weight116.00
Weight UOMPounds

This Kit Contains

Slider; G360 3-4 and 5-Reverse, HM290 1-2 and 3-4
Slider; G360 3-4 and 5-Reverse, HM290 1-2 and 3-4 × 1
# 302641
Gasket; Adaptor to Transfer Case; Round with 6 Holes
Gasket; Adaptor to Transfer Case; Round with 6 Holes × 1
# 331304A
Seal
Seal × 1
# 386074
Small Parts Kit
Small Parts Kit × 1
# 404001A
Seal; Front
Seal; Front × 1
# 404070A
Seal; 65MM OD, Cone Type, Rear Out Put
Seal; 65MM OD, Cone Type, Rear Out Put × 1
# 404074
Seal; 90MM OD, Rubber Coated, Rear Out Put
Seal; 90MM OD, Rubber Coated, Rear Out Put × 1
# 404074A
Bearing; Input or Output, 23MM Thick, With Snap Ring, 80MM X 35MM X 23MM
Bearing; Input or Output, 23MM Thick, With Snap Ring, 80MM X 35MM X 23MM × 2
# 404220A
Bearing; Front or Rear Counter Shaft, 33MM OD
Bearing; Front or Rear Counter Shaft, 33MM OD × 1
# 404260
Bearing
Bearing × 2
# 404260A
Back Up Light Switch
Back Up Light Switch × 1
# 404411
Gear
Gear × 1
# 404585A
Slider; 42 Inner Teeth, Install with Bevel Side Towards 1st Gear; Can Use in Place of 302641
Slider; 42 Inner Teeth, Install with Bevel Side Towards 1st Gear; Can Use in Place of 302641 × 1
# 404643
Input Shaft; 26 Teeth
Input Shaft; 26 Teeth × 1
# 404670B
Input Shaft; Input
Input Shaft; Input × 1
# 404670E
Input Shaft; 35 Teeth
Input Shaft; 35 Teeth × 1
# 404670G
Shaft / Gear; Cluster, 1.180" Outer Diameter, No Groove, 34-28-22-14-43
Shaft / Gear; Cluster, 1.180" Outer Diameter, No Groove, 34-28-22-14-43 × 1
# 404674B
1-2 Middle Synchronizer
1-2 Middle Synchronizer × 2
# 404701-3
Synchronizer; 1-5, Bronze
Synchronizer; 1-5, Bronze × 1
# 404701A
Fork; 5th-Reverse
Fork; 5th-Reverse × 1
# 404843A
Shim Kit
Shim Kit × 1
# AT1109
Ball; 5mm
Ball; 5mm × 1
# AT14082095
Spring; 1-2
Spring; 1-2 × 1
# AT17285
Synchronizer Ring
Synchronizer Ring × 1
# AT18291
Synchronizer Key
Synchronizer Key × 1
# AT8672123
Seal
Seal × 1
# ATAS129
Bearing
Bearing × 1
# ATFC68009
Bearing Retainer; Front Bearing
Bearing Retainer; Front Bearing × 1
# ATNV3500-6A
Gear
Gear × 1
# ATNV3550-18
Main Shaft; Cluster Shaft Gear, 1.3" End, , 1" Groove, 34-28-23-15-14-43
Main Shaft; Cluster Shaft Gear, 1.3" End, , 1" Groove, 34-28-23-15-14-43 × 1
# ATNV3550-8A
Adapter to Transfer Case Gasket
Adapter to Transfer Case Gasket × 1
# ATTC2030-6