TranstarManual Transmission
Part #: NV3500-H $1,956.44 $600.00 Core
Call for Availability: +1 (833) 363-1938
Login for personalized shopping
Description & Specs
All units are torn down and thoroughly cleaned. All hard parts are inspected and if a known failure point has been identified, the part is replaced with a remanufactured or new part that is OE-quality or better. All soft parts are replaced. Units are assembled and, when possible, Dyno tested (Software to test some late models units is not yet available).
Manual Transmission; Remanufactured; Early style case, 'S' shaped shifter set forward on tail, 2 tapped holes on side of tail for transfer case shifter mount
This Kit Contains
Gasket; Adaptor to Transfer Case; Round with 6 Holes × 1
# 331304A
Speedometer Reluctor × 1
# 334997A
Seal × 1
# 386074
Small Parts Kit × 1
# 404001A
Seal; Front × 1
# 404070A
Seal; 90MM OD, Rubber Coated, Rear Out Put × 1
# 404074A
Bearing; Front or Rear Counter Shaft, 33MM OD × 1
# 404260
Bearing × 2
# 404260A
Back Up Light Switch × 1
# 404411
Gear × 1
# 404582A
Gear; 3rd, 30 Teeth, Second Design × 0
# 404583A
Gear × 1
# 404585
Gear × 1
# 404585A
Input Shaft; 26 Teeth × 1
# 404670B
Input Shaft; 35 Teeth × 1
# 404670D
Input Shaft; Input × 1
# 404670E
Input Shaft; 35 Teeth × 1
# 404670G
1-2 Middle Synchronizer × 2
# 404701-3
Synchronizer; 1-5, Bronze × 3
# 404701A
Bearing Retainer × 1
# 404724A
Fork; 3rd-4th × 1
# 404842
Fork; 5th-Reverse × 1
# 404843
Ball; 5mm × 1
# AT14082095
Spring; 1-2 × 1
# AT17285
Synchronizer Ring × 1
# AT18291
Synchronizer Key × 1
# AT8672123
Seal × 1
# ATAS129
Bearing Retainer; Front Bearing × 1
# ATNV3500-6A
Adapter to Transfer Case Gasket × 1
# ATTC2030-6