Hard Parts

Requires Assembly **Stator Shaft Bolts Requires Torque, Follow the Torque Procedure** One Top Bell Bolt Hole Type, Fits # 24236121, 24239892, 24239952 Casting, New Bushing and Seal, Incls Bell Housing Stator, Rotor Kit, 3 Mating Surfaces Machined, Bell To Stator Surface,Rotor Pocket, Bell To Case Surface, Sandblasted, Counter Boring Where Rotor Guide Rides, All Bolt Hole Threads To Mate Stator Are Chased With A Tap, Counter Sink To Bevel The Top Of Each Bolt Hole, Mating Surface, O/S Boost And P/R Valve, O/S TCC Feed Limit Valve

Input/Reverse, No Check Ball, Large Feed Hole

Compound Low, Non- Rotational Ring Type, Includes OH Kit, Filter, Bypass Valve, Planet Nut, Steel and Frictions

.708" Thick; Includes Rotor, Vanes, Seals, Slide, Rings & Guide

Direct; 6 Clutch; Stamped Steel; 34T Steels

Direct/Low/High, 5.800" Tall, 7.550” C Clutch OD, 6.200" D Clutch OD, 5/6/4 Frictions, 36 Teeth “C” Clutch Friction, 1.420" “C” Height, 44 Teeth "D" Clutch Friction, 1.720" “D” Clutch Height Updated Version

Low, Compound, Non Rotational Rings; Needs Two 132179A

Billet aluminum housing increases OD apply area by 16% and holds a physically taller clutch pack. The 2X thicker steels increase clutch pack steel mass by 28% for maximum heat dissipation. The double-sided BorgWarner clutch frictions are optimized for the 68RFE OD application and custom-made for the Sonnax kit. This guarantees an unrivaled combination of squawk resistance and maximum clutch capacity for any truck. This groundbreaking kit is the only top-of-the-line upgrade that eliminates clutch problems without relying on valve body/pump modifications or adding the expense of extra components.Modified housing holds physically taller clutch pack for 20% more clutch capacity, 16% More OD apply area for firmer, more controlled shifts, 2X Thicker steels and double-sided clutches increase steel mass by 28% for maximum heat dissipation, Custom BorgWarner clutches for maximum capacity with state-of-the-art squawk resistance, Bolt-on anchor plate eliminates clutch pack flexing and distortion that contribute to heat build-up, Combine with Sonnax line pressure booster kit RFE-LB1 for even higher levels of performance

Snap Ring Holds In Front Seal Type, Snap Ring and Front Seal Included

.708" Thick; Includes Rotor, Vanes, Seals, Slide, Rings & Guide

Seal On Front Cover Plate Type, Includes Cover and Seal

Reaction Sunshell, Bearing or Washer, Hardened Spline

C-D-F Clutch Shell Cylinder, Updated Version, Hard Coat Anodized, Sensor Ring

Requires Assembly **Stator Shaft Bolts Requires Torque, Follow the Torque Procedure** Two Top Bell Bolt Hole Type, Fits # 24248033, 24248034 Casting, New Bushing and Seal, Incls Bell Housing Stator, Rotor Kit, 3 Mating Surfaces Machined, Bell To Stator Surface,Rotor Pocket, Bell To Case Surface, Sandblasted, Counter Boring Where Rotor Guide Rides, All Bolt Hole Threads To Mate Stator Are Chased With A Tap, Counter Sink To Bevel The Top Of Each Bolt Hole, Mating Surface, O/S Boost And P/R Valve, O/S TCC Feed Limit Valve

4-5-6, 24 Teeth, 5 Clutch

3-5 and Reverse, With Input Shaft