Hard Parts
Transend - Products List
One Top Bell Bolt Hole Type, Fits # 24236121, 24239892, 24239952 Casting, New Bushing and Seal, Incls Bell Housing Stator, Rotor Kit, 3 Mating Surfaces Machined, Bell To Stator Surface,Rotor Pocket, Bell To Case Surface, Sandblasted, Counter Boring Where Rotor Guide Rides, All Bolt Hole Threads To Mate Stator Are Chased With A Tap, Counter Sink To Bevel The Top Of Each Bolt Hole, Mating Surface, O/S Boost And P/R Valve, O/S TCC Feed Limit Valve
6L80, 6L90
Login for personalized shopping
Billet aluminum housing increases OD apply area by 16% and holds a physically taller clutch pack. The 2X thicker steels increase clutch pack steel mass by 28% for maximum heat dissipation. The double-sided BorgWarner clutch frictions are optimized for the 68RFE OD application and custom-made for the Sonnax kit. This guarantees an unrivaled combination of squawk resistance and maximum clutch capacity for any truck.
This groundbreaking kit is the only top-of-the-line upgrade that eliminates clutch problems without relying on valve body/pump modifications or adding the expense of extra components.Modified housing holds physically taller clutch pack for 20% more clutch capacity, 16% More OD apply area for firmer, more controlled shifts, 2X Thicker steels and double-sided clutches increase steel mass by 28% for maximum heat dissipation, Custom BorgWarner clutches for maximum capacity with state-of-the-art squawk resistance, Bolt-on anchor plate eliminates clutch pack flexing and distortion that contribute to heat build-up, Combine with Sonnax line pressure booster kit RFE-LB1 for even higher levels of performance
68RFE
Login for personalized shopping
Servo, Cast # 093 Type, Includes 2nd Apply Piston, Housing, 2 O-Rings, 2 Sealing Rings; No Accumulator Pistons
4L60-E, THM700-R4/4L60/MD8, 4L65-E
Login for personalized shopping
Direct/High, 5.800" Tall, 44 Teeth F Clutch, 44 Teeth D Clutch, 36 Teeth C Clutch
10R80, 10R90, 10L80, 10L90, 10L60, 10R80 MHT, 10L80/MHS, 10L80/MHT, 10L80/MQB, 10L80/MQC, 10L80/MI2
Login for personalized shopping
Two Top Bell Bolt Hole Type, Fits # 24248033, 24248034 Casting, New Bushing and Seal, Incls Bell Housing Stator, Rotor Kit, 3 Mating Surfaces Machined, Bell To Stator Surface,Rotor Pocket, Bell To Case Surface, Sandblasted, Counter Boring Where Rotor Guide Rides, All Bolt Hole Threads To Mate Stator Are Chased With A Tap, Counter Sink To Bevel The Top Of Each Bolt Hole, Mating Surface, O/S Boost And P/R Valve, O/S TCC Feed Limit Valve
6L80, 6L90
Login for personalized shopping
Input drum Sssembly, Includes 14 Overdrive and 12 Underdrive Clutches, Modified Input and Overdrive Housings, OE Input Hub, Custom Underdrive Piston Assembly, and RevMax OD/Reverse and OD/UD Pressure Plates, Rated to 550 HP / 1100 ft. lbs Torque.
68RFE
Login for personalized shopping
C-D-F Clutch Shell Cylinder, Updated Version, Hard Coat Anodized, Sensor Ring
10R80
Login for personalized shopping
Overdrive Piston Housing, With or Without Governor Feed Holes, Includes Plugs
46RE, 47RE, A518 (46RH), 46RH, 48RE, 47RH
Login for personalized shopping
.590" Thick Milled Flat Gear Type, Bushing for Converter Hub, No Front Stator Busing Type
6R80
Login for personalized shopping
Cast # 24236121, Included Front Seal and Bushing, Rotor Kit Not Included, Also Fit # 24248033, 24248034
6L80, 6L90
Login for personalized shopping
CDF Clutch, C/Direct, D/Low, F/High
10R80, 10R90, 10L80, 10L90, 10L60, 10R80 MHT, 10L80/MHS, 10L80/MHT, 10L80/MQB, 10L80/MQC, 10L80/MI2
Login for personalized shopping
Input Drum Assembly, Includes 14 Overdrive and 12 Underdrive Clutches, Billet and Anodized Input Drum Featuring Custom Cooling Circuits, Overdrive Housing, OE Input Hub, Custom Underdrive Piston Assembly, and RevMax OD/Reverse and OD/UD Pressure Plates, Rated to 700HP.
68RFE
Login for personalized shopping
Includes Line Pressure Booster Kit, Lube Regulated Pressure Regulator Valve, TCC Pressure Limiter Valve, Spring & Plug, AFL Filter End Plug & O-Ring Kit, Direct Clutch Dual Feed Plug, Direct Clutch Dual Feed Aluminum Plugs (3) 2 Extra, 1-2, 2-3 & 3-4 Accumulator Piston Springs (3) Checkballs (8) Twist Drill .062", Twist Drill .086", Heavy Duty Case Bushing & Bearing Kit, Direct Housing Support Ring & Seal, Heavy Duty Intermediate Piston Spring Retainer Plate, Case Saver Retainer, Heavy Duty Clutch Retaining Ring Intermediate Clutch, Accumulator Valve Springs & Adjustable End Plug 2 Springs, Heavy Duty Direct Piston Return Springs (8), Forward Clutch Hub Front Washer .078", Reverse Servo Spacer
4L80-E, 4L80-E-HD/MN8, THM-R2/MT1, 4L85-E
Login for personalized shopping
Fits in Bell Housing Pump Pocket, With Gasket, Latex Coated
722.6, NAG1, W5A580, W5A380, W5J400, 722.666
Login for personalized shopping
Overdrive Piston Housing, Retros All With or Without Governor Feed Holes, Includes Plugs
42RE, 42RH, 44RE, A500
Login for personalized shopping
Casting CTR, 29 Teeth, with Belt, Pulleys, Cover, Bearings, CTR#1/2
CVT2, F1CJA, RE0F10A
Login for personalized shopping
Transmission
The most comprehensive line of transmission parts in the world.