Create account for special pricing & promos.
MenuTransend Auto Tech
  1. Home
  2. Transmission
  3. Complete Transmission
  4. Manual Transmissions
  5. G56-B
Transtar Manual Transmission G56-B
  • Transtar Manual Transmission G56-B

TranstarManual Transmission

Part #: G56-B
$8,711.26 $3,000.00 Core
Quantity
Login for personalized shopping

Description & Specs

All units are torn down and thoroughly cleaned. All hard parts are inspected and if a known failure point has been identified, the part is replaced with a remanufactured or new part that is OE-quality or better. All soft parts are replaced. Units are assembled and, when possible, Dyno tested (Software to test some late models units is not yet available).

Manual Transmission; Remanufactured; Rear Main Shaft Bearing Held By Snap Ring

Name Specs
Country of Origin (Primary)US
Minimum Order Quantity1
Product ConditionRemanufactured

This Kit Contains

Shim Kit; Input, Includes 7 Shims: Thickness 011" (Qty of One) .005" (Qty of Two) .015" (Qty of Two) .010" (Qty of Two)
Shim Kit; Input, Includes 7 Shims: Thickness 011" (Qty of One) .005" (Qty of Two) .015" (Qty of Two) .010" (Qty of Two) × 1
# 306204K
Seal; Output Shaft
Seal; Output Shaft × 1
# 312071
Seal; Output Shaft
Seal; Output Shaft × 1
# 312071A
Seal; Input Pocket
Seal; Input Pocket × 1
# 312072
Seal; Input Shaft
Seal; Input Shaft × 1
# 312080
Washer; 4th Gear
Washer; 4th Gear × 1
# D312214
Bearing; Cup and Cone, Input, Front, Tapered Roller, 80 x 50 x 25
Bearing; Cup and Cone, Input, Front, Tapered Roller, 80 x 50 x 25 × 2
# 312220
Bearing; Cluster Shaft, Front
Bearing; Cluster Shaft, Front × 1
# 312230
Bearing Cup and Cone; Cup and Cone, Input, Rear, Tapered Roller, 30 x 26.5
Bearing Cup and Cone; Cup and Cone, Input, Rear, Tapered Roller, 30 x 26.5 × 1
# 312267
5-6 Cluster Gear, 48 Teeth X 52 Teeth
5-6 Cluster Gear, 48 Teeth X 52 Teeth × 1
# 312585-1
Gear; 6th, 23 Teeth
Gear; 6th, 23 Teeth × 1
# 312586
Input Shaft; 27 Teeth, 2 ID Rings on Shaft
Input Shaft; 27 Teeth, 2 ID Rings on Shaft × 1
# 312670
Input Shaft; 27 Teeth, 2 ID Rings On Shaft
Input Shaft; 27 Teeth, 2 ID Rings On Shaft × 1
# D312670
Input Shaft; 28 Teeth, 3 ID Rings On Shaft
Input Shaft; 28 Teeth, 3 ID Rings On Shaft × 1
# D312670A
Cluster Shaft Assembly; 5-6 and 3-4 Gears with Shaft
Cluster Shaft Assembly; 5-6 and 3-4 Gears with Shaft × 1
# D312674AK
Main Shaft; Main
Main Shaft; Main × 1
# D312678
Shifter
Shifter × 1
# D312831
Gasket; Adaptor to Transfer Case; Round with 6 Holes
Gasket; Adaptor to Transfer Case; Round with 6 Holes × 1
# 331304A
Shim Kit; Input, Includes 1 Spacer and 3 Shims (1 x Spacer 89.5mm x 76.5mm x 2.2mm, 1 x Shim 89.5mm x 76.5mm x .35mm, 1 x Shim 89.5mm x 76.5mm x .25mm, 1 X shim 89.5mm x 76.5mm x .10mm)
Shim Kit; Input, Includes 1 Spacer and 3 Shims (1 x Spacer 89.5mm x 76.5mm x 2.2mm, 1 x Shim 89.5mm x 76.5mm x .35mm, 1 x Shim 89.5mm x 76.5mm x .25mm, 1 X shim 89.5mm x 76.5mm x .10mm) × 1
# 476204K
Bearing; Rear Output, Front and Cluster Shaft, Rear
Bearing; Rear Output, Front and Cluster Shaft, Rear × 1
# 494220
Standard Bearing Kit without Synchronizer
Standard Bearing Kit without Synchronizer × 1
# BK474

Vehicle Fitment

Years Vehicle Drive Types
2005 - 2008Dodge Ram 35004WD
2005 - 2009Dodge Ram 25004WD