TranstarManual Transmission

Part #: 290-M

$1,852.42 $1,000.00 Core

Description & Specs

All units are torn down and thoroughly cleaned. All hard parts are inspected and if a known failure point has been identified, the part is replaced with a remanufactured or new part that is OE-quality or better. All soft parts are replaced. Units are assembled and, when possible, Dyno tested (Software to test some late models units is not yet available).

Manual Transmission; Remanufactured; Single Rail Style, with Shifter, Late Style Case with Extra Hole at Top, Flat Style Front Bearing Retainer, 32 Spline, Aluminum Case, Integral Bellhousing, Integral Clutch Slave Cylinder

Name	Specs
Country of Origin (Primary)	US
Minimum Order Quantity	1
Package UOM	Each
Product Condition	Remanufactured
Quantity Per UOM	1
Weight	120.00
Weight UOM	Pounds

+ See More

This Kit Contains

Slider; G360 3-4 and 5-Reverse, HM290 1-2 and 3-4 × 1

# 302641

Gasket; Adaptor to Transfer Case; Round with 6 Holes × 1

# 331304A

Small Parts Kit × 1

# 404001A

Seal; Front × 1

# 404070A

Seal; 65MM OD, Cone Type, Rear Out Put × 1

# 404074

Seal; 90MM OD, Rubber Coated, Rear Out Put × 1

# 404074A

Seal; 54MM OD, Rear Out Put × 1

# 404074B

Bearing; Input or Output, 23MM Thick, With Snap Ring, 80MM X 35MM X 23MM × 2

# 404220A

Bearing; Front or Rear Counter Shaft, 33MM OD × 1

# 404260

Bearing × 2

# 404260A

Back Up Light Switch × 1

# 404411

Counter Shaft Plug × 1

# 404483

Gear; 3rd, 30 Teeth, Second Design × 0

# 404583A

Gear × 0

# 404585A

Shifter Assembly; 3rd Design With Internal Detent × 1

# 404625B

Slider; 42 Inner Teeth, Install with Bevel Side Towards 1st Gear; Can Use in Place of 302641 × 1

# 404643

Input Shaft; 26 Teeth, with 3 Spline Grooves × 1

# 404670C

Shaft / Gear; Cluster, 1.180" Outer Diameter, No Groove, 34-28-22-14-43 × 1

# 404674B

1-2 Middle Synchronizer × 2

# 404701-3

Synchronizer; 1-5, Bronze × 1

# 404701A

Fork; 3rd-4th × 1

# 404842

Ball; 5mm × 1

# AT14082095

Spring; 1-2 × 1

# AT17285

Synchronizer Ring × 1

# AT18291

Synchronizer Key × 1

# AT8672123

Adapter to Transfer Case Gasket × 1

# ATTC2030-6

Pilot Bearing × 1

# L381

+ See More

Vehicle Fitment

Years	Vehicle	Drive Types
2007 - 2007	Chevrolet Silverado 1500 Classic	4WD
2006 - 2006	Chevrolet Silverado 1500	4WD
2007 - 2007	GMC Sierra 1500 Classic	4WD
2006 - 2006	GMC Sierra 1500	4WD