Create a Transend account now to earn Special Pricing and Promotions. Sign Up Now

Create account for special pricing & promos.

Transtar Manual Transmission NV4500-B

TranstarManual Transmission

Part #: NV4500-B

$2,152.34 $1,500.00 Core

Call for Availability: +1 (833) 363-1938

Login for personalized shopping

Description & Specs

All units are torn down and thoroughly cleaned. All hard parts are inspected and if a known failure point has been identified, the part is replaced with a remanufactured or new part that is OE-quality or better. All soft parts are replaced. Units are assembled and, when possible, Dyno tested (Software to test some late models units is not yet available).

Manual Transmission; Remanufactured

Name	Specs
Country of Origin (Primary)	US
Minimum Order Quantity	1
Package UOM	Each
Product Condition	Remanufactured
Quantity Per UOM	1
Weight	150.00
Weight UOM	Pounds

This Kit Contains

Gasket; PTO Cover × 2

# 301305

# 301485

Insert; Mode, Long, 45MM, Reverse Center × 1

# 321700-2A

Gasket; Adaptor to Transfer Case; Round with 6 Holes × 1

# 331304A

Seal; Front × 1

# 334070

Seal × 1

# 334074A

Seal × 1

# 334074C

Seal × 1

# 334076

Seal × 1

# 334076A

# 334211-2

Bearing Cup × 1

# 334211-3

Needle Bearing; Input × 1

# 334240

Bearing Race; Input × 1

# 334240-3

Pocket Bearing, Input × 1

# 334267

Needle Bearing × 2

# 334271

Needle Bearing × 1

# 334274

Needle Bearing × 1

# 334275

Needle Bearing; Reverse × 1

# 334277

WASHER, NV4500, REV × 1

# 334290

Back Up Light Switch; Reverse × 0

# 334411

Bearing Cap × 1

# 334483

Top Cover Pin × 2

# 334485A

Gear; 2nd, 37 Teeth × 1

# 334582

3rd Gear Counter Shaft, 30 Tooth, 5.61 Ratio × 1

# 334583-1A

3rd Gear Main Shaft, 29 Tooth, 5.61 Ratio × 1

# 334583A

Gear; Countershaft 4th, 38 Teeth × 1

# 334584-1A

Gear; 5th, 51 Teeth, Countershaft, Used with 22 Teeth Mainshaft, 5.61 Ratio × 1

# 334585-1

Gear; 5th, 22 Teeth, with 31 Inner Spline × 1

# 334585-2

Clutch Cone; Reverse Gear, For Mainshaft Reverse × 1

# 334587-2

Shift Rail; 5th × 1

# 334628

# 334628-1B

Shift Rail × 1

# 334628A

Shift Rail × 1

# 334628D

Hub and Slider Kit × 1

# 334641K

Hub and Slider Kit; 3rd-4th × 1

# 334642K

Slider; 5-Reverse × 1

# 334644

Input Shaft; 22 Teeth, 10 Spline × 1

# 334670D

Main Shaft; Main, 19-3/4 × 1

# 334672A

Cluster Shaft; Cluster, 39 Teeth Mainshaft Reverse × 0

# 334674

Cone; Input Synchro × 1

# 334701-1A

1-2 Synchronizer × 2

# 334701-3

Synchro Ring; 3-4, 39 Teeth, 3.64" ID, Brass × 2

# 334703

Synchronizer; 5th × 1

# 334705

Key; For 1-2 × 4

# 334707-1

# 334707-3

Spring; 2-3 Synchro × 6

# 334710-3

Bearing Retainer × 1

# 334724

Detent Plunger × 3

# 334741

Cover; Top, Shell Only, Fits With Push/Twist Round Shifter Only × 1

# 334756

Bolt × 8

# 334792

Nut Kit; Main Shaft, GM and Dodge Gas, Updated, Contains Nut, 2 Set Screws, 2 Brass Plugs and Washer × 1

# 334795BK

Fork; 1-2 Shift × 1

# 334841

Fork; 3-4 Shift × 1

# 334843

Fork; 5th Shift × 1

# 334845

Insert; Reverse × 2

# 334846-1

Fork; Reverse, Early With Detent, Push/Twist Top × 1

# 334847

Fork; Reverse, Late With Detent, Square Bolt Type Cover × 1

# 334847A

# 334860

# 334860A

Plug; Sealing, small, 10.05mm OD × 1

# 359483

Output, Adapter, Input Seal For BW4493 × 1

# 382074

Insert; .770" Long, Straight × 2

# 411850-1

Seal, Reat Output Shaft, 77 x 54 x 12 × 1

# 424074

Bearing; Countershaft, Front, 45 ID X 20 W × 1

# 424260-2

Bearing Race; Countershaft, Front, 73.5 OD x 15.6 W × 1

# 424260-3

Plug; Rear Top Cover × 3

# 476484

Pinion/Input Bearing; 1.625" Bearing Inside Diameter; Rear × 1

# 742G255

Cup Race; Driven Transfer Gear to Case × 1

# D92280

Bearing; Transfer Gear × 1

# D92281

Spring; 1-2 × 4

# AT17285

Vent Tube; 90 Degree × 1

# AT17988

Adaptor; Housing × 1

# AT18305

Shift Rail; 3-4 × 1

# AT18320

# AT18437

# AT18863

Detent Spring; Shift Rail, 1st Design, Orange × 3

# AT18876

Detent Bullet × 2

# AT35660

Top Cover Vent Baffle × 1

# AT4500-63

# AT89279

Needle Bearing × 1

# ATC1110Q

# ATK25/35/30

Race; Input Bearing × 1

# ATNP728109