Create a Transend account now to earn Special Pricing and Promotions. Sign Up Now

Create account for special pricing & promos.

Login / Sign Up

Transtar Manual Transmission NV3500-G

TranstarManual TransmissionPart #: NV3500-G

$1,678.40 $600.00 Core

Call for Availability: +1 (833) 363-1938

Login for personalized shopping

Description & Specs

All units are torn down and thoroughly cleaned. All hard parts are inspected and if a known failure point has been identified, the part is replaced with a remanufactured or new part that is OE-quality or better. All soft parts are replaced. Units are assembled and, when possible, Dyno tested (Software to test some late models units is not yet available).

Manual Transmission; Remanufactured; No speedo, early style case, 'S' shaped shifter set forward on tail

Name	Specs
Package UOM	Each
Quantity Per UOM	1
Weight	123.00
Weight UOM	Pounds

This Kit Contains

Slider; G360 3-4 and 5-Reverse, HM290 1-2 and 3-4 × 1

# 302641

Gasket; Adaptor to Transfer Case; Round with 6 Holes × 1

# 331304A

Seal × 1

# 386074

Small Parts Kit × 1

# 404001A

Bushing; Extension Housing × 1

# 404066

Seal; Front × 1

# 404070A

Seal; 65MM OD, Cone Type, Rear Out Put × 1

# 404074

Seal; 90MM OD, Rubber Coated, Rear Out Put × 1

# 404074A

Seal; 54MM OD, Rear Out Put × 1

# 404074B

Bearing; Input or Output, 23MM Thick, With Snap Ring, 80MM X 35MM X 23MM × 1

# 404220A

Bearing; Front or Rear Counter Shaft, 33MM OD × 1

# 404260

# 404260A

Back Up Light Switch × 1

# 404411

Counter Shaft Plug × 1

# 404483

Gear × 1

# 404585A

Slider; 42 Inner Teeth, Install with Bevel Side Towards 1st Gear; Can Use in Place of 302641 × 1

# 404643

Input Shaft; 26 Teeth × 1

# 404670B

Input Shaft; 35 Teeth × 1

# 404670D

Input Shaft; Input × 1

# 404670E

Shaft / Gear; Cluster, 1.187 Outer Diameter, 1.000" Groove, 34-28-22-14-43 × 1

# 404674A

Shaft / Gear; Cluster, 1.180" Outer Diameter, No Groove, 34-28-22-14-43 × 1

# 404674B

Shaft / Gear; Cluster, 1.300" Outer Diameter, 1.000" Groove, 34-28-23-15-14-43 × 1

# 404674E

Shaft / Gear; Cluster, 1.180" Outer Diameter, No Groove, 46-37-22-14-52 × 1

# 404674G

1-2 Middle Synchronizer × 1

# 404701-3

Fork; 3rd-4th × 1

# 404842

Fork; 5th-Reverse × 1

# 404843

Ball Stud; Clutch Fork Pivot Ball, When Out Use D424487 × 1

# 424487

# AT14082095

# AT17285

Synchronizer Ring × 1

# AT18291

Needle Bearing × 1

# AT290-148

Needle Bearing × 1

# AT290-158A

Synchronizer Key × 1

# AT8672123

Seal × 1

# ATAS129

Bearing Retainer; Front Bearing × 1

# ATNV3500-6A

Adapter to Transfer Case Gasket × 1

# ATTC2030-6