TranstarTransfer Case Unit

Part #: RNP263XHD-Y

$1,668.34 $600.00 Core

Description & Specs

Transfer Case Unit; Remanufactured; Electric Shift, 29 Spline Input,31 Spline Output, 3 Position Dash Switch, Option Code NP1, With Allison Automatic Or 6 Speed Manual Transmission

This Kit Contains

Rear Case; 31 Spline Output Shaft Type, Casting # 25909 × 1

# 25900

Bearing; Needle, 50mm x 58mm x 20mm × 1

# 303211A

Bearing, Rear Output Shaft, with Snap Ring Groove (Snap Ring Not Included) × 1

# 309210A

Bearing, Pocket Input Shaft, 29 Spline × 1

# 309267A

Bearing; Input, 80mm X 50mm X 16mm × 1

# 325287

Gasket; Adaptor to Transfer Case; Round with 6 Holes × 1

# 331304A

Synchronizer Spring × 2

# 331710

Screen Connector; Pump × 1

# 351012-1

Synchronizer Key × 3

# 351071-2

Snap Ring; NP241DHD; Rear Output Bearing on Pump Gear Side × 1

# 352860B

Pump Assembly; 49 Splines × 1

# 401500

Hub; NP261; Drive × 1

# 401606

Hub; NP261, NP263; Drive, Updated, Rides on Mainshaft inside Drive Sproket × 1

# 401606A

Slider; NP261, NP263; Mode × 1

# 401646

Input Shaft; NP263; 29 Spline, Wide × 1

# 401670B

Main Shaft; Updated, Requires Updated Mode Snap Ring Part # 401865 × 1

# 401672A

Synchronizer; Inner Synchro, Mode, Carbon Lined × 1

# 401701-1

Synchronizer; Middle (Center) Synchro, Mode, Carbon Lined × 1

# 401701-3

Synchronizer; Outer Synchro, Mode, Carbon Lined × 1

# 401701-5

Sprocket; NP263XHD × 2

# 401805A

Fork; Range; Inserts Not Included, Requires (2) 421849-1 × 1

# 401849

Fork; Mode, Aluminum, Cast # 28624 × 1

# 401850

Snap Ring; Mode Hub, Updated, Use With 49 Spline Pump Main Shaft. Does Not Fit 38 Spline Pump Main Shaft × 1

# 401865

Tone Wheel; 49 Spline Type × 1

# 401997A

Seal; Input, Double Lip, Polyacrylic Version × 1

# 411070A

Seal; Front Output × 1

# 411081A

Washer; NP136, NP231, NP233, NP236, NP241C, NP241D, NP242, NP243, NP246, NP247, NP249, MP12, MP16, MP30; Planetary Thrust, 2 Tabs × 2

# 411215

Bearing × 1

# 411279

Speed Sensor; Output, NP136, NP261, NP263, MP1225, MP1226, MP1625, MP1626 × 1

# 411436

Vent Tube; Plastic × 1

# 411490

Hub; NP263XHD; Range, with .368" Wide Groove, Electric Shif Type, Updated × 1

# 421606

Insert; Range, Updated, 3.68" Wide Fork, Groove Style × 2

# 421849-1

Seal, Reat Output Shaft, 77 x 54 x 12 × 1

# 424074

Transfer Case Filter × 1

# 435012

Front Case; Casting # 30601, Electric Shift, Uses Wide (24MM) Input Bearing, Pivot Bosses Not Drill/Tap × 1

# 45545

Filter and Tube × 1

# 482463A

Snap Ring × 1

# 482860

Stud; 10.5MM × 1

# 492775

Solid Bushing, bronze, extension housing, Stage 1, Stage 2, Diesel Performance × 1

# DB72066C

Seal; Shift Shaft × 1

# AT23504

Range Fork Spring × 1

# AT29228

Drain and Fill Plug; Fill / Drain Plug × 1

# AT30412

Range Fork Bracket; NP263XHD × 1

# AT32096

Plug; Tail housing, Rubber × 1

# AT88958815

Seal × 1

# ATAS012

Seal × 1

# ATAS017

Bearing × 2

# ATB126

Seal; Shift Shaft × 1

# ATFNJ16

Ball Bearing; Input, Snap Ring Groove In The Edge Of Bearing, 50 MM (1.969") ID x 80 MM (3.150") OD x 24 MM (0.945") Thick × 1

# BD50-8

Chain; 1.5" x 42 Links, .4346 Pitch, Round Pin Joint × 1

# HV-074

Planet; Rebuilt, 6-Pin × 1

# ATR241320A

Aftermarket Split Bushing × 1

# TSWT297-62

+ See More

Vehicle Fitment

Years	Vehicle	Drive Types
2002 - 2002	Cadillac Escalade	AWD
2007 - 2007	Chevrolet Silverado 3500 HD	4WD
2007 - 2007	Chevrolet Silverado 3500 Classic	4WD
2001 - 2006	Chevrolet Silverado 3500	4WD
2007 - 2007	Chevrolet Silverado 2500 HD Classic	4WD
2001 - 2007	Chevrolet Silverado 2500 HD	4WD
2001 - 2002	GMC Yukon	AWD, 4WD
2007 - 2007	GMC Sierra 3500 HD	4WD
2001 - 2006	GMC Sierra 3500	4WD
2007 - 2007	GMC Sierra 2500 HD Classic	4WD
2001 - 2007	GMC Sierra 2500 HD	4WD

+ See More