Hard Parts

Requires Assembly **Stator Shaft Bolts Requires Torque, Follow the Torque Procedure** One Top Bell Bolt Hole Type, Fits # 24236121, 24239892, 24239952 Casting, New Bushing and Seal, Incls Bell Housing Stator, Rotor Kit, 3 Mating Surfaces Machined, Bell To Stator Surface,Rotor Pocket, Bell To Case Surface, Sandblasted, Counter Boring Where Rotor Guide Rides, All Bolt Hole Threads To Mate Stator Are Chased With A Tap, Counter Sink To Bevel The Top Of Each Bolt Hole, Mating Surface, O/S Boost And P/R Valve, O/S TCC Feed Limit Valve

Requires Assembly **Stator Shaft Bolts Requires Torque, Follow the Torque Procedure** Two Top Bell Bolt Hole Type, Fits # 24248033, 24248034 Casting, New Bushing and Seal, Incls Bell Housing Stator, Rotor Kit, 3 Mating Surfaces Machined, Bell To Stator Surface,Rotor Pocket, Bell To Case Surface, Sandblasted, Counter Boring Where Rotor Guide Rides, All Bolt Hole Threads To Mate Stator Are Chased With A Tap, Counter Sink To Bevel The Top Of Each Bolt Hole, Mating Surface, O/S Boost And P/R Valve, O/S TCC Feed Limit Valve

Stator, 36 Spline, 9-1/8" Long, Steel Ring Land, Non Rotational Ring Type **SERVICE TIP; Add Part # T104531CK**

Cast # 5C3P, No Remote Filter

Seal On Front Cover Plate Type, With Updated TCC Limit Valve

7.300" Shaft, No O-Ring, With Speed Sensor Hole

Steel Coast Drum Type; Pulse Width Modulated (PWM) Seal Ring Above Stator Bushing

1.250" ID Stator Bushing, With Groove For Stator Sealing Ring, Lock-Up

7.300" Shaft, Pulse Width Modulated (PWM) Type, With Lip, O-Ring in Body Type

Cast Coast Drum Type; E9, F1, F5, F8 Cast

Without Power Take Off (PTO) Type

Seal On Front Cover Plate Type, With Updated TCC Accumulator and TCC Limit Valve

Forward Clutch; With Ring Gear, Bonded Pistons Type

Cast # 24236121, Included Front Seal and Bushing, Rotor Kit Not Included, Also Fit # 24248033, 24248034

Aluminum Support With Sonnax Snap Ring, Support Has Been Cut