Differential Carrier Cases
Transend - Products List
Categories & Filters
Shop By Category
Air Compressors Axle Kits Axle Spindles Axles Chromoly Axles Differential Axle Bearings, Seals, Studs Differential Bushings Differential Carrier Cases Differential Covers Differential Hardware, Nuts, Bolts, Clips Differential Lockers & Spools Differential Parts & Units Differential Rebuild Kits Differential Service Items Differential Small Parts & Seals Differential Snap Rings Differential Spider Gears & Internals Differential Springs Differential Washers, Bearings & Shims Differential Yokes Housings, Dropouts & Pinion Supports Limited Slip Differentials Ring & Pinion Gear Sets Tools for Differentials Universal Joints Wheel Hubs & Locking Hubs
Brand
Stock Availability
GM 8.5/8.6; Posi; 28 Spline; Drum Brakes; Loaded; Detroit Truetrac. All Eaton differentials made for General Motors 8.5" and 8.6" axles require special bearings. For axles with small bearing bores (race O.D. or 2.89"), usually found on vehicles prior to 1999, bearing 424260-2 and race ATLM102911 are required. For axles with large bearing bores (race O.D. of 3.06"), usually found on vehicles from 1999 to present, bearing 722B270 and race 722B271 are required.
Login for personalized shopping
GM 8.5/8.6; 30 Spline; Helical Gear Type. For years 1988 - 1999 only - General Motors 8.5" and 8.6" axles require special bearings. For axles with small bearing bores (race O.D. or 2.89"), usually found on vehicles prior to 1999, bearing 424260-2 and race ATLM102911 are required. For axles with large bearing bores (race O.D. of 3.06"), usually found on vehicles from 1999 to present, bearing 722B270 and race 722B271 are required.
Call for Availability: +1 (833) 363-1938
Login for personalized shopping
Standard; Loaded; Includes Bearings/Shims; 3.54 And Up/3.27 Carrier Break; 1 5/8" Tall
Login for personalized shopping
3.250" Outer Diameter Pinion Bearing; Dura Grip; 31 Spline
Login for personalized shopping
3.250" Outer Diameter Pinion Bearing; Standard; 31 Spline; 7/8" Cross Pin Hole
Login for personalized shopping
Bare Standard Open Carrier Case; Fits 28 or 30 Spline internals; 2.73 And Up Carrier Break; 1.627" Bearing Journal Diameter
Login for personalized shopping
Bare Standard Open Carrier Case; Fits 28 or 30 Spline internals; 2.73 And Up Carrier Break; 1.784" Bearing Journal Diameter; Heavy Duty Large Hub Design
Login for personalized shopping
Standard; For Use with Quick Disconnect; Uses Bearings PN[50006]
Call for Availability: +1 (833) 363-1938
Login for personalized shopping
GM 8.5/8.6; 28 Spline. All Eaton differentials made for General Motors 8.5" and 8.6" axles require special bearings. For axles with small bearing bores (race O.D. or 2.89"), usually found on vehicles prior to 1999, bearing 424260-2 and race ATLM102911 are required. For axles with large bearing bores (race O.D. of 3.06"), usually found on vehicles from 1999 to present, bearing 722B270 and race 722B271 are required.
Login for personalized shopping
GM 8.5/8.6; 28 Spline; ECT; 2.73-Up Ratio; Includes Side Bearing Kit
Call for Availability: +1 (833) 363-1938
Login for personalized shopping