TranstarManual Transmission
Part #: G56-B $8,711.26 $3,000.00 Core
Login for personalized shopping
Description & Specs
All units are torn down and thoroughly cleaned. All hard parts are inspected and if a known failure point has been identified, the part is replaced with a remanufactured or new part that is OE-quality or better. All soft parts are replaced. Units are assembled and, when possible, Dyno tested (Software to test some late models units is not yet available).
Manual Transmission; Remanufactured; Rear Main Shaft Bearing Held By Snap Ring
This Kit Contains
Seal; Output Shaft × 1
# 312071
Seal; Output Shaft × 1
# 312071A
Seal; Input Pocket × 1
# 312072
Seal; Input Shaft × 1
# 312080
Washer; 4th Gear × 1
# D312214
Bearing; Cluster Shaft, Front × 1
# 312230
5-6 Cluster Gear, 48 Teeth X 52 Teeth × 1
# 312585-1
Gear; 6th, 23 Teeth × 1
# 312586
Input Shaft; 27 Teeth, 2 ID Rings on Shaft × 1
# 312670
Input Shaft; 27 Teeth, 2 ID Rings On Shaft × 1
# D312670
Input Shaft; 28 Teeth, 3 ID Rings On Shaft × 1
# D312670A
Cluster Shaft Assembly; 5-6 and 3-4 Gears with Shaft × 1
# D312674AK
Main Shaft; Main × 1
# D312678
Shifter × 1
# D312831
Gasket; Adaptor to Transfer Case; Round with 6 Holes × 1
# 331304A
Standard Bearing Kit without Synchronizer × 1
# BK474
Vehicle Fitment
Years | Vehicle | Drive Types |
---|---|---|
2008 - 2010 | Dodge Ram 5500 | 4 X 4, 4 X 2 |
2008 - 2010 | Dodge Ram 4500 | 4 X 4, 4 X 2 |
2005 - 2010 | Dodge Ram 3500 | RWD, 4WD |
2005 - 2010 | Dodge Ram 2500 | RWD, 4WD |
2011 - 2016 | Ram 5500 | 4 X 4, 4 X 2 |
2011 - 2017 | Ram 4500 | 4 X 4, 4 X 2 |
2011 - 2018 | Ram 3500 | RWD, 4WD |
2011 - 2018 | Ram 2500 | RWD, 4WD |