Create a Transend account now to earn Special Pricing and Promotions. Sign Up Now

Create account for special pricing & promos.

Login / Sign Up

Transtar Manual Transmission 290-AB

TranstarManual TransmissionPart #: 290-AB

$1,651.36 $1,000.00 Core

Login for personalized shopping

Description & Specs

All units are torn down and thoroughly cleaned. All hard parts are inspected and if a known failure point has been identified, the part is replaced with a remanufactured or new part that is OE-quality or better. All soft parts are replaced. Units are assembled and, when possible, Dyno tested (Software to test some late models units is not yet available).

Manual Transmission; Remanufactured; Single rail style, with shifter, early style case, snout style front bearing retainer, 32 spline

Name	Specs
Package UOM	Each
Quantity Per UOM	1
Weight	240.00
Weight UOM	Pounds

This Kit Contains

Slider; G360 3-4 and 5-Reverse, HM290 1-2 and 3-4 × 1

# 302641

Gasket; Adaptor to Transfer Case; Round with 6 Holes × 1

# 331304A

Small Parts Kit × 1

# 404001A

Seal; Front × 1

# 404070A

Seal; 65MM OD, Cone Type, Rear Out Put × 1

# 404074

Seal; 90MM OD, Rubber Coated, Rear Out Put × 1

# 404074A

Seal; 54MM OD, Rear Out Put × 1

# 404074B

Bearing; Input or Output, 23MM Thick, With Snap Ring, 80MM X 35MM X 23MM × 2

# 404220A

Bearing; Front or Rear Counter Shaft, 33MM OD × 1

# 404260

# 404260A

Back Up Light Switch × 1

# 404411

Counter Shaft Plug × 1

# 404483

Gear × 1

# 404582

Gear; 3rd, 30 Teeth, Second Design × 1

# 404583A

Gear × 1

# 404585

Gear × 1

# 404585A

Shifter Assembly; 3rd Design With Internal Detent × 1

# 404625B

Slider; 42 Inner Teeth, Install with Bevel Side Towards 1st Gear; Can Use in Place of 302641 × 1

# 404643

Input Shaft; 26 Teeth, No Step × 1

# 404670A

Main Shaft; Main × 1

# 404672AA

Shaft / Gear; Cluster, 1.187 Outer Diameter, 1.000" Groove, 34-28-22-14-43 × 1

# 404674A

Shaft / Gear; Cluster, 1.180" Outer Diameter, No Groove, 34-28-22-14-43 × 1

# 404674B

1-2 Middle Synchronizer × 2

# 404701-3

Bearing Retainer × 1

# 404724A

Pivot Ball; Fork × 1

# 404837-1

Fork; 3rd-4th × 1

# 404842

Fork; 5th-Reverse × 1

# 404843

# AT14082095

# AT17285

Synchronizer Ring × 1

# AT18291

Needle Bearing × 1

# AT290-158

Needle Bearing × 1

# AT290-175

Synchronizer Key × 1

# AT8672123

Adapter to Transfer Case Gasket × 1

# ATTC2030-6

Pilot Bearing × 1

# L381