Transmission

Remanufactured, 12.5" Body Diameter, Stepped Slotted Flanged Hub Type, 3 Mounts, Stepped Pads Mount Type, 11" Bolt Circle, 1.702" Pilot Outside Diameter, No Ring Gear, JMBX, 24242396, 24242397, 24238202, 24245962, 24243219 Sticker Codes, Low Stall, 36 Turbine Splines, Lock-Up

Without Pistons, Generation 2, Non Start/Stop Models, (For Pistons Add Part # 144960FK)

Without Piston, (For Piston Add Part# A154967), (For Steels Add Part # 154139).

Without Pistons, (For Bonded Pistons add Part # 132960K) (For Steels add Part # 132139)

Remanufactured, 13.4" Body Diameter, Slotted/Flanged Hub Type, 6 Mounts, Drilled & Tapped Pads Mount Type, 12.25" Bolt Circle, 1.811" Pilot Outside Diameter, No Ring Gear, Low Stall, 23 Turbine Splines, Lock-Up, Billet Cover

DRIVE. TOW. RACE.

Requires Assembly **Stator Shaft Bolts Requires Torque, Follow the Torque Procedure** One Top Bell Bolt Hole Type, Fits # 24236121, 24239892, 24239952 Casting, New Bushing and Seal, Incls Bell Housing Stator, Rotor Kit, 3 Mating Surfaces Machined, Bell To Stator Surface,Rotor Pocket, Bell To Case Surface, Sandblasted, Counter Boring Where Rotor Guide Rides, All Bolt Hole Threads To Mate Stator Are Chased With A Tap, Counter Sink To Bevel The Top Of Each Bolt Hole, Mating Surface, O/S Boost And P/R Valve, O/S TCC Feed Limit Valve

VFS Torque Converter Clutch (TCC), **SERVICE TIP; ADD PART # S132843**

without Bonded Pistons

Remanufactured; Reflash required, Reset adaptive values

Line Pressure, Transducer

Remanufactured, 10.75" Body Diameter, Flats/Flanged Hub Type, 4 Mounts, Pads Mount Type, 9" Bolt Circle, No Ring Gear, 447AB, 520AA, 520AB, 527AA, 527AB, 538AA, 538AB, 556AA, 556AB, 556AC, 557AA, 557AB, 557AC, 559AC Stamped Codes, Low Stall, 22 Turbine Splines, Electronically Modulated Converter Clutch Grooved Clutch Friction Type, Lock-Up

Input/Reverse, No Check Ball, Large Feed Hole

32 oz.; Low Viscosity; ATF-J3; Dexron VI; DW-1; Matic-S; Mercon LV; SP-IV; SPH-IV; WS; FZ; ZF6; ZF8

Cast # 24248033, Replaces Cast # 24236121, 24239892, 24248034, 24239952, Uses G1/8-28 thread for the pressure tab plug **SERVICE TIP; ADD PART # T104531CK**