Manual Transmission Parts
Transend - Products List
Must Use Special Tool T-DPSCAC To Remove And Install, Includes Modular Clutch Set, Release Bearing, Clutch System Hardware
DPS6
Login for personalized shopping
Must Use Special Tool T-DPSCAC To Remove And Install, Includes Modular Clutch Set, Release Bearing, Clutch System Hardware
with Synchronizer; Casting Number C18157 or C23167
NV4500, NV4500HD
Login for personalized shopping
with Synchronizer; Casting Number C18157 or C23167
Cast # 1307
S5-42
Login for personalized shopping
Cast # 1307
Includes: Clutch Disc, Flywheel, Hydraulic Concentric Slave Cylinder, Pilot Bearing, Pressure Plate, Release Bearing, Alighment Tool
G56
Login for personalized shopping
Includes: Clutch Disc, Flywheel, Hydraulic Concentric Slave Cylinder, Pilot Bearing, Pressure Plate, Release Bearing, Alighment Tool
Output Shaft; Front; 2.750" Inner Diameter
Login for personalized shopping
Output Shaft; Front; 2.750" Inner Diameter
Multi-Piece 1-2 Fiber Lined Synchro Rings
T5, T5/ML2, T5/ML3, T5/MW1
Login for personalized shopping
Multi-Piece 1-2 Fiber Lined Synchro Rings
1" Outer Diameter Countshaft Pin, 80mm Outer Diameter Input Bearing
Muncie
Login for personalized shopping
1" Outer Diameter Countshaft Pin, 80mm Outer Diameter Input Bearing
Casting Number C18157 or C23167
NV4500, NV4500HD
Login for personalized shopping
Casting Number C18157 or C23167
30mm Outer DiameterCountershaft Bearings, Multi-Piece 1-2 Synchros
NV3500, NV3500/MG5, NV3550, NV3500/M50
Call for Availability: +1 (833) 363-1938
30mm Outer DiameterCountershaft Bearings, Multi-Piece 1-2 Synchros
Input or Output, 23MM Thick, With Snap Ring, 80MM X 35MM X 23MM
NV3500, NV3500/MG5, NV3550, NV4500, NV3500/M50, NV4500/MW3
Login for personalized shopping
Input or Output, 23MM Thick, With Snap Ring, 80MM X 35MM X 23MM
Cast # 1317
S5-47
Login for personalized shopping
Cast # 1317
Input Shaft
G56
Login for personalized shopping
Input Shaft
23mm Thick Input Bearing, Snap Ring On Countershaft Type
AX5
Login for personalized shopping
23mm Thick Input Bearing, Snap Ring On Countershaft Type
Main, 1.975" 1st Gear Bearing Journal
S6-650
Login for personalized shopping
Main, 1.975" 1st Gear Bearing Journal
With 1" Outer Diameter Pin, Includes Snap Rings, Thrust Washers, Lose Needle roller bearings for the cluster gear, 1 roll pin, 1 solid tapered pin foe the rev idler shaft, Lose needle rollers for the pocket of the input shaft (no cage)
Muncie
Login for personalized shopping
With 1" Outer Diameter Pin, Includes Snap Rings, Thrust Washers, Lose Needle roller bearings for the cluster gear, 1 roll pin, 1 solid tapered pin foe the rev idler shaft, Lose needle rollers for the pocket of the input shaft (no cage)
11" Clutch; 10 Splines; Release Bearing Height And Clutch Finger Height May Be Different Than Original
A833, M62, M64, CH465/MC9, SM465/M20, SM465/M21, MY6, SM326/M15, SM330/M15, 162T, T-10, SM420, 160T, 435GA, 435GL, Muncie, Saginaw, SM318, SM319, SM326, SM327, SM328, SM330, SM428, SM429, SM430, SM465, T-10A, T-10C, T-10D, T-10E, T-10K, T-10S, T-10W, T16, T16D, T85, T86, T89, M22
Login for personalized shopping
11" Clutch; 10 Splines; Release Bearing Height And Clutch Finger Height May Be Different Than Original
Transmission
The most comprehensive line of transmission parts in the world.