Search Results for "housing"

Direct/Low/High, 5.800" Tall, 7.550" C Clutch OD, 6.200" D Clutch OD, 5/6/4 Frictions, 36 Teeth "C" Clutch Friction, 1.420" "C" Height, 44 Teeth "D" Clutch Friction, 1.720" "D" Clutch Height Updated Version

Cast # 24248033, Replaces Cast # 24236121, 24239892, 24248034, 24239952, **SERVICE TIP; Add Part # T104531CK**

C-D-F Clutch Shell Cylinder, Updated Version, Hard Coat Anodized, Sensor Ring

Requires Assembly **Stator Shaft Bolts Requires Torque, Follow the Torque Procedure** One Top Bell Bolt Hole Type, Fits # 24236121, 24239892, 24239952 Casting, New Bushing and Seal, Incls Bell Housing Stator, Rotor Kit, 3 Mating Surfaces Machined, Bell To Stator Surface,Rotor Pocket, Bell To Case Surface, Sandblasted, Counter Boring Where Rotor Guide Rides, All Bolt Hole Threads To Mate Stator Are Chased With A Tap, Counter Sink To Bevel The Top Of Each Bolt Hole, Mating Surface, O/S Boost And P/R Valve, O/S TCC Feed Limit Valve

Billet aluminum housing increases OD apply area by 16% and holds a physically taller clutch pack. The 2X thicker steels increase clutch pack steel mass by 28% for maximum heat dissipation. Custom BorgWarner clutches for maximum capacity with state-of-the-art squawk resistance. Bolt-on anchor plate eliminates clutch pack flexing and distortion that contribute to heat build-up ****SERVICE TIP; Add part # S72741H for higher levels of performance**

Requires Assembly **Stator Shaft Bolts Requires Torque, Follow the Torque Procedure** Two Top Bell Bolt Hole Type, Fits # 24248033, 24248034 Casting, New Bushing and Seal, Incls Bell Housing Stator, Rotor Kit, 3 Mating Surfaces Machined, Bell To Stator Surface,Rotor Pocket, Bell To Case Surface, Sandblasted, Counter Boring Where Rotor Guide Rides, All Bolt Hole Threads To Mate Stator Are Chased With A Tap, Counter Sink To Bevel The Top Of Each Bolt Hole, Mating Surface, O/S Boost And P/R Valve, O/S TCC Feed Limit Valve

without Pistons, Bonded Pan Gasket, Does not include Super Duty Extension Housing Seal 3.175" Outer Diameter

Remanufactured, 12.5" Body Diameter, Stepped Slotted Flanged Hub Type, 3 Mounts, Stepped Pads Mount Type, 11" Bolt Circle, 1.702" Pilot Outside Diameter, No Ring Gear, JMBX, 24242396, 24242397, 24238202, 24245962, 24243219 Sticker Codes, Low Stall, 36 Tur

Servo, Cast # 093 Type, Includes 2nd Apply Piston, Housing, 2 O-Rings, 2 Sealing Rings; No Accumulator Pistons

Input & Output Speed; **Fits the One Piece Unigear Output Shaft Only**

Cast # 24248033, Replaces Cast # 24236121, 24239892, 24248034, 24239952, Rotor Kit Not Included

Input drum Sssembly, Includes 14 Overdrive and 12 Underdrive Clutches, Modified Input and Overdrive Housings, OE Input Hub, Custom Underdrive Piston Assembly, and RevMax OD/Reverse and OD/UD Pressure Plates, Rated to 550 HP / 1100 ft. lbs Torque.

Underdrive Housing; .500" Tall; Bonded Retainer # 216-4310

1-2-3-4 Clutch; Aluminum; Updated

Does Not Include Extension Housing Bushing, Solid Bushing Kit