TranstarManual Transmission
Part #: NV4500-A $2,034.99 $1,500.00 Core
Call for Availability: +1 (833) 363-1938
Login for personalized shopping
Description & Specs
All units are torn down and thoroughly cleaned. All hard parts are inspected and if a known failure point has been identified, the part is replaced with a remanufactured or new part that is OE-quality or better. All soft parts are replaced. Units are assembled and, when possible, Dyno tested (Software to test some late models units is not yet available).
Manual Transmission; Remanufactured; Cast Iron Case, Detachable Bell Housing, External Slave Cylinder, Square Four Bolt Shift Tower, Main Case Cast 16812, Top Cover Cast 18860, Or 25137, Tail Housing Cast 18306
| Name | Specs |
|---|---|
| Package UOM | Each |
| Quantity Per UOM | 1 |
| Weight | 150.00 |
| Weight UOM | Pounds |
This Kit Contains
Gasket; PTO Cover × 2
# 301305
Loc. Pin × 2
# 301485
Insert; Mode, Long, 45MM, Reverse Center × 1
# 321700-2A
Gasket; Adaptor to Transfer Case; Round with 6 Holes × 1
# 331304A
Seal; Front × 1
# 334070
Seal × 1
# 334074A
Seal × 1
# 334074C
Seal × 1
# 334076
Seal × 1
# 334076A
Spacer × 1
# 334206
Bearing × 1
# 334211-2
Bearing Cup × 1
# 334211-3
Shim; Mainshaft .004"-.005" × 1
# 334226
Shim; Mainshaft .006"-.006" × 1
# 334226A
Shim; Mainshaft .010"-.012" × 1
# 334226B
Needle Bearing; Input × 1
# 334240
Bearing Race; Input × 1
# 334240-3
Pocket Bearing, Input × 1
# 334267
Needle Bearing × 2
# 334271
Needle Bearing × 1
# 334274
Needle Bearing × 1
# 334275
Needle Bearing; Reverse × 1
# 334277
WASHER, NV4500, REV × 1
# 334290
Back Up Light Switch; Reverse × 0
# 334411
Bearing Cap × 1
# 334483
Top Cover Pin × 2
# 334485A
Gear; 2nd, 37 Teeth × 1
# 334582
3rd Gear Counter Shaft, 30 Tooth, 5.61 Ratio × 1
# 334583-1A
3rd Gear Main Shaft, 29 Tooth, 5.61 Ratio × 1
# 334583A
Gear; Countershaft 4th, 38 Teeth × 1
# 334584-1A
Gear; 5th, 22 Teeth, with 31 Inner Spline × 1
# 334585-2
Shift Rail; 5th × 1
# 334628
Shift Lug × 0
# 334628-1B
Shift Rail × 0
# 334628A
Shift Rail × 0
# 334628D
Hub and Slider Kit; 3rd-4th × 1
# 334642K
Input Shaft; 22 Teeth, 10 Spline × 1
# 334670D
Main Shaft; Main, 19-3/4 × 1
# 334672A
Cone; Input Synchro × 1
# 334701-1A
1-2 Synchronizer × 2
# 334701-3
Synchronizer; 1st-2nd, Outer × 1
# 334701-5
Synchronizer; 3-4 × 2
# 334703
Synchronizer; 5th × 1
# 334705
Key; For 1-2 × 4
# 334707-1
Key; 3-4 × 6
# 334707-3
Spring; 2-3 Synchro × 6
# 334710-3
Bearing Retainer × 1
# 334724
Detent Plunger × 3
# 334741
Bolt × 8
# 334792
Fork; 1-2 Shift × 1
# 334841
Fork; 3-4 Shift × 1
# 334843
Insert; Reverse × 2
# 334846-1
Fork; Reverse, Early With Detent, Push/Twist Top × 0
# 334847
Snap Ring × 1
# 334860A
Plug; Sealing, small, 10.05mm OD × 0
# 359483
Output, Adapter, Input Seal For BW4493 × 1
# 382074
Insert; .770" Long, Straight × 2
# 411850-1
Seal, Reat Output Shaft, 77 x 54 x 12 × 1
# 424074
Bearing; Countershaft, Front, 45 ID X 20 W × 1
# 424260-2
Bearing Race; Countershaft, Front, 73.5 OD x 15.6 W × 1
# 424260-3
Plug; Rear Top Cover × 3
# 476484
Cup Race; Driven Transfer Gear to Case × 1
# D92280
Bearing; Transfer Gear × 1
# D92281
Spring; 1-2 × 4
# AT17285
Vent Tube; 90 Degree × 0
# AT17988
Adaptor; Housing × 0
# AT18305
Shift Rail; 3-4 × 0
# AT18320
Roll Pin × 8
# AT18437
Shift Lug × 0
# AT18863
Detent Spring; Shift Rail, 1st Design, Orange × 3
# AT18876
Detent Bullet × 2
# AT35660
Top Cover Vent Baffle × 0
# AT4500-63
Gasket × 0
# AT89279
Needle Bearing × 0
# ATC1110Q
Bearing × 1
# ATK25/35/30
Race; Input Bearing × 1
# ATNP728109