Create a Transend account now to earn Special Pricing and Promotions. Sign Up Now

Create account for special pricing & promos.

Login / Sign Up

Transtar Manual Transmission FS5W71-G

TranstarManual TransmissionPart #: FS5W71-G

$1,403.89 $600.00 Core

Login for personalized shopping

Description & Specs

All units are torn down and thoroughly cleaned. All hard parts are inspected and if a known failure point has been identified, the part is replaced with a remanufactured or new part that is OE-quality or better. All soft parts are replaced. Units are assembled and, when possible, Dyno tested (Software to test some late models units is not yet available).

Manual Transmission; Remanufactured

Name	Specs
Package UOM	Each
Quantity Per UOM	1
Weight	110.00
Weight UOM	Pounds

This Kit Contains

Ball Bearing, 72 x 30 x 19, No Snap Ring Groove × 1

# 303210

Needle Bearing × 1

# 303215

# 303230A

Bearing; Center Cluster × 1

# 303231

Bearing; Rear Cluster × 1

# 303232

Bearing; Rear Cluster, 20mm ID, 47mm OD, 14mm Thick × 1

# 303232A

Needle Bearing; 20mm ID, 26mm OD, 20mm Thick × 1

# 303267

# 303316

# 303323

Gear × 1

# 303583

Sleeve; 5th Gear × 1

# 303585-5

5th Gear Kit, 21/39 Teeth × 1

# 303585AK

5th Gear Kit, 22/37 Teeth × 1

# 303585BK

5th Gear Kit, 21/39 Teeth × 1

# 303585CK

Reverse Gear × 1

# 303587

Gear × 1

# 303587-1

Hub × 1

# 303605

# 303644

SLIDER, FS5W71, REV, 1993-UP × 1

# 303644A

Input Shaft / Gear Kit; 21 Teeth / 32 Teeth, Wide Gear, with No Synchro Stop × 1

# 303670

Input Shaft / Gear Kit; 22T/31T, Narrow Gear × 1

# 303670A

Input Shaft / Gear Kit; 21T/32T, Wide Gear, Small (26mm Outer Diameter) Pocket Bearing Type × 1

# 303670C

Main Shaft; Main × 1

# 303672

Main Shaft; Main × 1

# 303672A

Main Shaft; Cluster, 28-19-13 × 1

# 303674

Key × 1

# 303674A-1

Synchronizer × 2

# 303701

Synchronizer × 1

# 303701A

Synchronizer Ring; 2nd, 3 Piece Set × 1

# 303701B

Synchronizer Assembly × 1

# 303703K

Synchronizer; 5th × 1

# 303705

Bearing Retainer × 1

# 303735A

Bearing Retainer × 1

# 303736

Bearing Retainer × 1

# 303736AA

Nut × 1

# 303795L

Nut × 1

# 303796

Gear × 1

# 303819

Fork; 5th-Reverse × 1

# 303846

# 313232A

Seal; Rear, Outer × 1

# 372070

Bearing; 30mm ID, 72mm OD, 19mm Thick, With Groove For Snap Ring × 1

# 456211

Bearing; Needle, 25mm x 32mm x 20mm × 1

# 303211

Shim; Countershaft, .012" × 1

# AT32218-V5002

Gear × 1

# AT32253-V5200

Needle Bearing × 1

# AT32264-V5202

Thrust Washer; M/S, Thick, Takes a Pin × 1

# AT32352-E9813

# AT32603-36N00

# AT32603-73200

Standard Items × 1

# AT32605-V5201

Key; 5th, Reverse; H/B × 1

# AT32609-36N15

Key × 1

# AT32609-70L15

Key × 1

# AT32609-70L20

# AT32611-V5215

Fork; 1-2 Shift × 1

# AT32805-58S00

# AT38322-54W00

Seal × 1

# ATAS118

Needle Bearing × 1

# ATK32/37/17S

Synchronizer × 1

# ATNIS-14E

Synchronizer Ring; 1st, 2nd, 3rd or 4th, Single Ring Type × 1

# ATNIS-14S

Fork × 1

# ATNIS-23B

# M6306N

Synchronizer; 3-4 × 2

# NIS-14G

Synchronizer × 1

# NIS-14T